fbpx

Reply To: linear advance

#1503
phongshaderphongshader
Participant

Quote:

Can you please run M205 and show the output?


Code:

Send: M205
Recv: ok


looking through the firmwareI see that this is setup

Code:

//#define CLASSIC_JERK

#define LIMITED_JERK_EDITING

#define DEFAULT_EJERK 5.0 // May be used by Linear Advance

#define S_CURVE_ACCELERATION


Quote:

Please also take a screenshot of your repetier Host menu


I’m using octoprint. According to this post https://forum.repetier.com/discussion/4951/how-to-open-eeprom-settings-does-it-allows-export-and-import-in-xml-files

Quote:

Mac has eeprom for repetier-firmware only

unfortunately I’m on a mac and running command+E brings up a blank screen.

Quote:

Also I notice your Lin advance K factor is .22??!


The firmware is set to the default K factor but the s3d start script is

Code:

G28 ; home all axes

; Add Extruder 0 no mixing
M163 S0 P1
M163 S1 P0
M164 S0

; Add Extruder 1 no mixing
M163 S0 P0
M163 S1 P1
M164 S1
M900 K1.1 ; set k factor PLA


which brings up another question the start script only changes the K factor for E0 and E1 remains at the default. I have to update E1 from the lcd menu. What do I have to add to the start script to set the K factor for both extruders? Do I add M900 K1.1 ; set k factor PLA to both entries?

Facebook Instagram YouTube