fbpx

Reply To: linear advance

#1500
phongshader
Participant

I’ll confess my ignorance, where do I find those settings?

Code:

Send: M503
Recv: echo: G21 ; Units in mm (mm)
Recv: echo: M149 C ; Units in Celsius
Recv:
Recv: echo:; Filament settings: Disabled
Recv: echo: M200 D1.75
Recv: echo: M200 T1 D1.75
Recv: echo: M200 D0
Recv: echo:; Steps per unit:
Recv: echo: M92 X80.13 Y80.12 Z3195.42 E415.00
Recv: echo:; Maximum feedrates (units/s):
Recv: echo: M203 X200.00 Y200.00 Z10.00 E50.00
Recv: echo:; Maximum Acceleration (units/s2):
Recv: echo: M201 X1000.00 Y1000.00 Z100.00 E500.00
Recv: echo:; Acceleration (units/s2): P R T Recv: echo: M204 P1000.00 R500.00 T1000.00
Recv: echo:; Advanced: B S T J
Recv: echo: M205 B20000.00 S0.00 T0.00 J0.01
Recv: echo:; Home offset:
Recv: echo: M206 X0.00 Y0.00 Z0.00
Recv: echo:; Unified Bed Leveling:
Recv: echo: M420 S0 Z0.00
Recv:
Recv: Unified Bed Leveling System v1.01 inactive
Recv:
Recv: echo:; Active Mesh Slot: -1
Recv: echo:; EEPROM can hold 7 meshes.
Recv:
Recv: echo:; Material heatup parameters:
Recv: echo: M145 S0 H180 B60 F0
Recv: echo: M145 S1 H240 B110 F0
Recv: echo:; PID settings:
Recv: echo: M301 P18.03 I0.97 D83.46
Recv: echo: M304 P148.98 I29.30 D504.98
Recv: echo:; Z-Probe Offset (mm):
Recv: echo: M851 X-25.40 Y-6.50 Z-0.20
Recv: echo:; Linear Advance:
Recv: echo: M900 T0 K0.22
Recv: M900 T1 K0.22
Recv: echo:; Filament load/unload lengths:
Recv: echo: M603 T0 L0.00 U100.00
Recv: echo: M603 T1 L0.00 U100.00
Recv: echo:; Tool-changing:
Recv: echo: Z2.00
Recv: echo:; Filament runout sensor:
Recv: echo: M412 S1

Facebook Instagram YouTube