Please run a test pattern and copy and paste the entire repetier host log output from that print (be sure to clear the log before you start). Make sure you enable all log options.
By the way, why are you using simplify3d for a test pattern? The test pattern gcode is generated with an online tool meaning you bypass simplify3d all together.
Please either print the gcode directly from SDCard or from Repetier host (if you must use a pc/Mac)
I was running the test pattern from the G-Code Library tab of the Machine Control Panel in Simplify3D – and then returned to test printing with a stringing test model from Thingiverse
Higher numbers were tested as it was mentioned that those worked better for Bowden systems in an earlier post – but I guess for Repetier FW – will retest on wednesday when I’m back in the office