Reply To: Layer Shifts / Multi Material 50% Under Extrusion

[mr.s]

I’ll do the tests with the singe v6 hotend profile and low acceleration.

I’ll swap out the driver with the x axis one as well.

Before I do that, do I need to change anything else other than the nozzle size from 0.4 to 0.8?

The drivers were replaced with these:

https://www.amazon.com/gp/product/B075XH1TSJ/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1

They should be the correct replacement, right?