fbpx

Reply To: Calibration/Tuning instructions

Forums The Beast V1, V2 and Elevator 3D Printer Support Calibration/Tuning instructions Reply To: Calibration/Tuning instructions

#1288
phongshaderphongshader
Participant

Any guidance on what I should be looking at to fix this? I’ve calibrated all the axes, the steppers per Dan’s instructions, the extruders(although the settings are a bit odd but the extrusion is correct). There was some obvious step skipping on the X axis in the print. I have the extrusion mult. set to .8 with a layer height of .02, .04 nozzle.
[attachment=1]IMG_1074.jpg[/attachment][attachment=0]IMG_1077.jpg[/attachment]

Facebook Instagram YouTube