fbpx

Reply To: Calibration/Tuning instructions

Forums The Beast V1, V2 and Elevator 3D Printer Support Calibration/Tuning instructions Reply To: Calibration/Tuning instructions

#1285
phongshaderphongshader
Participant

That didn’t fix the feed rate. ¯_(ツ)_/¯ I reset to 417.5 and the extrusion was cut in half 100 input 51.36 output
[attachment=1]Screen Shot 2019-12-29 at 4.32.13 PM.png[/attachment]
[attachment=1]Screen Shot 2019-12-29 at 4.32.13 PM.png[/attachment]

Facebook Instagram YouTube