Reply To: Missing V2 parts


v2.1.4 manual page 11


Assemble and attach the X Motor Bracket and X Idler bracket to the rear of a 620mm Makerslide Extrusion. Use M5 10mm screws with Flat T-Slot nuts to secure the 6mm Laser Cut components to the makerslide. Ensure the Rail is on the opposite side to the motor. For the X Idler, use 2x F605Z Bearings installed small face to small face as done for the Y front idlers and Z Belt idler.

There are M3 T-Slot nuts in the kit but the acrylic parts are clearly cut for M5 bolts. Unfortunately they are missing. What do I order from Amazon “Flat T-Slot nuts”? Are these the correct item? https://www.amazon.com/Pre-Assembly-Square-Nuts-Aluminum-Extrusions/dp/B01HJSGUIQ/ref=sr_1_1?keywords=flat%2Bt%2Bslot%2Bnuts&qid=1573878041&sr=8-1&th=1

Facebook Instagram YouTube